Where can I buy a Pixhawk Safety (Arming) Switch?
@BigAl wrote: I looked on Amazon and on eBay, but the only ones I can find will take about a month to deliver. Can I buy one from someone in the USA? My switch is broken. Posts: 2 Participants: 2 Read...
View ArticleArduPilot website rocks!
@Laser_Developer wrote: LightWare Optoelectronics is a partner of the ArduPilot project and we are therefore listed on this site. We have our own online store that logs tons of statistics about...
View ArticleHelp Crash log analysis
@Thonon wrote: Hello I have a fixhawk rctimer:Frame tarot 650telemetry 433mhzTaranis and delta 8I flew with 3 times without worries.Today i install:gimbalgoprotx videoRepeater with turnigy 9xI flew...
View ArticleDiscuss.ardupilot background color is boring
@skyscraper wrote: I suggest giving a bit of color to the background of the discuss page. The currrent non color justs looks like it never got finished. Color is really important. I am no html guru,...
View ArticleFly-zones and no-fly zones
@joe535 wrote: Hi, I am just new to this ardu-community and want to set up my own copter next year.I was thinking of the flight-restricion-zones as well.So up to now, the pilot is responsible not to...
View ArticleAbout debugging the arducopter firmware on windows in eclipse IDE
@nithinsreddy wrote: Hi, i am trying to build the adrucopter for pixhawk firmware,its building and generating adrucopter.px4, px4io-v2.elf and px4io-v2.bin files. when i debug the code, it is running...
View ArticleClik here to view.
I have some questions to the AUTO missions with pixhawk
@aamadeuss wrote: Hi, i have some questions to the AUTO missions with pixhawk copter:usualy i upload my mission, arm, take off in stabilize than switch auto and wait until the copter does RTL and fine...
View ArticleArm Question with plane
@aamadeuss wrote: question for plane:i have a plane with V-tail. it works in auto and manual, but i cant arm with the stick command (something reversed?!). i want to have the plane always armed, so i...
View ArticleHow to control Copter for alternative follow me mode
@josealb wrote: I am creating an alternative follow me mode using a companion computer on board the Solo. The drone must be able to point the camera and follow the subject.What do you think is the...
View ArticleAPM 2.6 MP not displaying X Quad Properly
@Dhall wrote: I recently installed an APM 2.6 with external compass and GPS onto my X frame Quadcopter. In mission planner I selected the X frame type, did all the calibrations and initial setups....
View ArticleParrot disco Arduplane arming and flying help can't get it to spin
@Wieland_Beck wrote: I have a parrot disco and it's running arduplane I want to fly it using game pad. On my ground station I can arm it but it does not respond to throttle or anything and the motor...
View ArticleBattery trade offs mah vs weight of multiples
@Adam_Campbell wrote: I purchased a 3S 5500mah 40c lipo for my Tarot 690 hexacopter with 750kv xinte 5010s , I get 12 minutes give or take. I have just ordered a parallel cable and Two 3S 8000 mah 45c...
View ArticleuBlox 8 on newest APM 2.8 BOARD Running copter 3.41
@Adam_Campbell wrote: I have the neo 8 ublox Radiolink SE100 on my ardupilot 2.8 I just installed. Are there any steps I need to take to insure im getting any benefits over uBlox neo6.? 2nd question I...
View ArticleAdd additional code while using Mission Planner
@Brandon_du_Toit wrote: Hello, I want to know if it is possible to use Mission Planner with the ArduPilot Mega as usual and still be able to add code to interact with the UART and or I2C? I basically...
View ArticlePixhawk 2.1 gyro and compass problem
@Nikolaos wrote: I am one of the first "lucky" owners of Pixhawk 2.1.Unfortunately I didn't manage to make it work properly so far. First of all I had difficulties to complete the Accel calibration....
View Article3.4 on 3dr Solo - help
@dabuek wrote: Hello, are there any instruction available that can help install AC3.4 on SOLO? Posts: 1 Participants: 1 Read full topic
View ArticleSimpleBGC Alexmos 2.4b6 gimbal control from Pixhawk PX4 serial to UART
@onthelearningcurve wrote: Looking at the Ardupilot wiki for gimbal control, I see that the SToRM32 gimbal can be controlled from the Pixhawk PX4 serial port to the gimbal UART. The SimpleBGC 2.4b6...
View ArticleReverse-Thrust Landing
@yang wrote: This is my LOG file, I do not know how to adjust the landing accuracy, and landing to 38 2016-11-17 16-05-54.bin.log (865.6 KB)4 meters stall crash Posts: 1 Participants: 1 Read full topic
View ArticlePixhawk 19200 baud mavlink telemetry
@Steven_Hildum wrote: I have been fighting with the Parameters not loading with the baud rate lowered to 19600. does anyone know if the pixhawk does not transmit this slow of mavlink? it works fine at...
View ArticleNo Flights Modes Appear in Mission Planner
@Tanquetix wrote: Hello to everybody.I've got an hexacopter, I install mission planner 2, I install the copter 3.4.2, with a pixhawk, I can calibrate all OK, but when I reach to the flight modes, all...
View Article