Status Text messages - just a thought
@pauljatherton wrote: I am working on a telemetry project which is a translator for Mavlink->FrSky using Teensy micro processor. The project provides not only visual telemetry but also calls out...
View ArticleArduplane and tailsitter VTOLs
@wazoo22 wrote: Good fun going on over in RCGroups, VTOL thread, with the little old KK2.1.5 board, Happy Sunday's excellent software, and Ran's equally good documentation. But the board is limited. I...
View ArticleBait Boat gps system
@David_J wrote: Hello everyone. I'm starting a project with baitboat. I have looking for gps for my boat but original gps system for baitboat costs over 500€. I'm guessing if I use ardupilot 2.6 but...
View ArticleLive calibration problem
@wacked wrote: What does the reset button do? I pushed it several times and still cant get it to live calibrate. ARDUCOPTER 2.8 Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
Fly away after take off in PosHold mode Navio2/PXFmini ArduCopter3.4.3 and 3.4.4
@Guiboy wrote: Hello I have encountered 2 fly aways after taking off in PosHold mode using RPi 3 running Navio2/ArduCopter 3.4.3 and PXFmini/ArduCopter 3.4.4 In both cases I was using a single compass...
View ArticleUblox m8n - PX4 -Copter V3.4.2 - GPS 1 failing configuration checks
@odineidolon wrote: Hello, I'm having some troubles tryng to use the ublox m8n GPS. The error that i have is :" GPS 1: u-blox navigation rate configuration 0x3FFPreArm: GPS 1 failing configuration...
View ArticleClik here to view.
Ardupilot Based Submarine at CES 17
@OlivierB wrote: Great CES 17 videos showcasing Ardupilot based Subs from TTRoboticsImage above from this video. There is also this one. From the description:The agility and swiftness of the Sea...
View ArticleAdding Third Motor to the Boat
@J.Leite wrote: My boat is actually today using 2 motors for speed and steer. I was wondering if there is a way I can use a third motor in the boat to increase speed with less battery consumption....
View ArticlePixhawk lite support?
@Patrick_Duffy wrote: Anybody know if Pixhawk lite works with the antenna tracker firmware 1.0? Compass, accel, and GPS all work, but I get no signals out on the servos. I switch to servo_test mode...
View ArticleCompass onboard calibration with Pixracer/Plane 3.7.1
@vadim wrote: Is onboard mag calibration supported on Pixracer? I can do "live calibration" for all 3 compasses OK. However, when I try to do onboard calibration, several issues happen:1. Mission...
View ArticleEMAX BLHeli 30A OPTO esc
@blakduc wrote: Greeting's, Newbie here in drone/uav/fpv/etc. world, please forgive my ignorance. I do have experience in the rc world but after 30 some years I only consider my self a seasoned newbie...
View ArticleMAVProxy cannot act as ground station for heli/Copter but works fine for Plane
@Sunit_Pal wrote: I tried to use MAVProxy as ground station. It works great for ArduPlane. However it does not work for heli/quads. I can see the flight mode and the no of packets received in the...
View ArticleClik here to view.
Full parameter list on MP and pb rally point
@Dorian wrote: Hello everyone, I have searched the forum, but I have not found an answer to my questions.I recently did an update to Mission Planner. After that, I lost the "Full Parameter List" tab,...
View ArticleSonar hc sr04 for apm2.8
@titisniper71 wrote: Hello,I want to connect a sonar hcsr04 on my apm2.8 in order to be able to drive in indoor.How do I go about it?How are connections made?Is there a specific program?What other...
View ArticleCan not stop spinning after Armed: ABORTED PARAM SEND, UNKNOWN PARAM NAME:...
@Thi_Hoang wrote: Hello The current version of APM Planer v2.0.2 gets this problem (in CMD Log). ABORTED PARAM SEND, UNKNOWN PARAM NAME: "THROW_MOT_START"Seems it is a wrong param or to be removed.So...
View ArticleI want to thank you for the help
@wacked wrote: My name it Terry, I live in Tipp City Ohio.I am still having trouble with my ARDUCOPTER boards I think it is my WINDOWS 10 pro. Posts: 1 Participants: 1 Read full topic
View Article3.4.4 does not trigger failsafe on low battery ?!?!
@AJack wrote: Hello,two flight this morning with 3.4.4 /Pixracerbattery fs voltage was set at 11.3v, first flight quad disarmed on rtl at about 2m agl and crashed, second flight with a new fully...
View ArticleLive calabration fail
@wacked wrote: Error #99 I have bem trying to get working for weeks. Any Ideas? Posts: 1 Participants: 1 Read full topic
View ArticleEdison as wifi hotspot
@rbachtell wrote: I have installed and flashed the edison in my pix2, everything appears to be working except that when I try to access the network profiles I get a message "Permission denied". My...
View ArticleStrange problem with APM 2.8 (clone) external compass
@Thi_Hoang wrote: I'm using APM 2.8 with external compass (comes with GPS module M8N) It was ok running external compass after I removed the jumper But the problem caused after I tried to upgrade the...
View Article