A few newbie questions
@qemay wrote: Hello, I fairly new to the pixhawk so I have a few questions about the configuration. Till now I was using different FC like cleanflight on naze32, but recently I started using ardupilot...
View ArticleSkid Steer Dagu WIld Thumper no output on pitch channel
@stevecohen wrote: Hi all, I posted in regards to this build almost a year ago - time flies. I reviewed some prior posts about the wild thumper and sabretooth 2x25 - We have 2x12' in its place. Issue...
View ArticleSpektrum AR 7700 and pixhawk
@David_Boulanger wrote: I ordered a 7700 and I am wondering how people are hooking it up to a pixhawk. It looks like I have three choices. serial, PPM or remote receiver input. Pros and cons to each?...
View ArticleWaypoint radius using RTK
@heliboy wrote: I have finally got my GPS RTK to work. I get better than 6 decimal point lat/lon so I estimate my positioning error is somewhere in the order of 20 to 50cm. I had lot of difficulty in...
View ArticleClik here to view.
Discrepancy between CAM and TRIG log
@Kyomo_Jung wrote: cam_trig.png974x251 15.5 KB Hi guys, Test Environment.No GPS ( Indoor ).AP3.6.0.Nex 7.Camera shooting : by MP - "trigger cam now" As you see above picture, there might be some...
View ArticleFirmware for SF11
@cala2 wrote: Thank's to Lightware a sf11 is arriving, I understand that 3.4 beta perhaps it's the best firm to test it from the first time? Posts: 3 Participants: 2 Read full topic
View ArticleStrange battery cell readings
@Barry_Bolton wrote: Morning Folks. I have the following hardware. Supermate DC6 Balance chargerGence Ace 400mah 5s 45c batteryAnd 2 x voltage buzzers At the end of a balance charge the Charger will...
View ArticleOptical Flow with lidar lite bumps
@kuspower wrote: Hello, I'have made new tests with lidar lite and optical flow, and I have issued many burst on Z axis. I was testing the system in indoor on a textured concrete floor types and...
View ArticleErr: EKF_CHECK-2 Bad Crash
@basbura wrote: Have Err: EKF_CHECK-2 twice in 1 flight. First time I got it to RTL and error was gone so I decided to fly some more and switch to PosHold mode (which was a misstake and flew some more...
View ArticleWhat has changed with AutoTune?
@wicked1 wrote: I'm struggling with AutoTune.I've done it w/ 3.3 a bunch of times, even on this same copter. W/ 3.4, I have trouble getting it to start.. Has the throttle deadband decreased, so it has...
View ArticleClik here to view.
Rugged ArduBoat for Mapping Applications (Continued)
@Kevin_K wrote: This Discussion Thread is a continuation of the original Discussion Thread, "Rugged ArduBoat for Mapping Applications", that was originally located in the DIY Drones ArduBoat User...
View ArticleClik here to view.
ArduPilot T-Shirts, Keychains and other merchandise
@jpkh wrote: Keychains_750px_land.jpg732x480 182 KB Are you interested to work with one of the best Autopilot group in the world?? We are looking talented people to make several different type...
View ArticleNumber of photo in survey grid generator
@Agridroni wrote: In the survey grid when I change the "sidelap%" the numbers of photos change but if I change "overlap%" correctly change "distance between images" and "photo every" but not the...
View ArticleVibeZ worse on one motor
@pauljatherton wrote: I have been doing some vibration testing today on my Tarot 680Pro hexa (setup in hexa-x layout), with Sunnysky x4108s kv690 motors. 5 of the motors are almost vibration free with...
View ArticleMAVLINK messages via Telemetry without sending Heartbeat
@Asaf_Sarid wrote: I am using an APM 2.6 that is connected to an Odroid USB via the Telemetry port (UART to USB). I am trying to get MAVLINK messages without the need to keep sending a HEARTBEAT...
View ArticleClik here to view.
Autotune Crash with KDE 7208 and KDE esc
@Tom_Gear wrote: Hi friends, yesterday I tried to autotune my big x8 (bad idea ) with KDE 7208 110KV Motors and Kde 75A esc (setup for the 7208) with 27" KDE Props.12sAUW was 25kg The behavior before...
View ArticleWaiting for heartbeat
@infusion123 wrote: Hi I need some help. I'm following the instructions here http://ardupilot.org/dev/docs/raspberry-pi-via-mavlink.html but I'm stuck at the part " Waiting for Heartbeat ".I've been...
View ArticleError: waf configure --board=navio2?
@radioelf wrote: Hi.I am following in the footsteps of: http://ardupilot.org/dev/docs/building-for-navio2-on-rpi3.htmli have this error: "Waf: Run from a directory containing a file named 'wscript'"...
View ArticleClik here to view.
Throttle stuck wide open - Plane 3.6
@bchristal wrote: There's another similar topic as well. Might be a serious bug. http://discuss.ardupilot.org/t/lost-throttle-control-in-manual-mode-full-throttle/9641 SetupPlane 3.6Zubax...
View ArticlePlugin versioning
@Mitar wrote: Hello.I made plugin for MP 1.3.37. This plugin works on .37 and .38 but not working on previous (i checked 1.3.30, 1.3.20) How plugin versioning works? Posts: 1 Participants: 1 Read full...
View Article