Canceled autotune / went back to stabilize when saw battery getting low and...
@Totalslaughter wrote: Hey All. So I built a large hexacopter last year with a Sony Nex-6 in 3 axis gimbal with a pixhawk as the controller. It sat over the winter and I got it out the other day and...
View ArticleClik here to view.
Wayoint info & Set Mount what are they doing?
@ahmed wrote: Hi all , maybe may Questions is common for mostof you but until now I couldn't understand it . I am wandering if there is a bearing information in MP ? and what's the meaning of this...
View ArticleFailsafe landing gear on 3.3.3
@Effy_Sh wrote: Hithis is my setup:pixhawk +taranis +x8ri configured the landing gear on my tarot 650 sporton ch12_opt =29 (landing gear) connected to aux5and ch7 =landing gear when i flip the switch...
View ArticleClik here to view.
Copter3.4 pxflow issue
@Uncle wrote: http://ardupilot.org/copter/docs/common-px4flow-overview.htmlI've followed that Instruction. I have no Lidar Lite RangeFinder, but LZ-EZ4 buid-in with px-flow. It is said the build-in...
View ArticleCopter 3.4-dev disarm in midflight using pre-release firmware
@rmackay9 wrote: There has been at least one report of a vehicle flying Copter-3.4-rc1 and disarming in the air when switching from AUTO to LAND mode. (see report here). The cause is not yet clear but...
View ArticleQuadcopter pitches backwards and stops when releasing stick instead of...
@f4ichuck wrote: Hi, I've searched for somebody having similar behavior and suggestions without much luck. I'm running:Ardupilot Flight Controller 2.6 with Arducopter 3.2Symmetrical X layout quad with...
View ArticleRangefinder improvement
@khancyr wrote: Hi, I got a question about rangefinder message. Currently we are using : which is specific to APM. But we also accept MAVLINK_MSG_ID_DISTANCE_SENSOR for mavlink rangefinder. Should we...
View ArticleAbnormal altitude loss in althol when flying forward
@Boxerone wrote: Dear all, I know that this problem has been discussed several times, both here and and DIY forum, but I am wondering if someone could help diagnosing this.I have 3 different...
View ArticleEasycap USB Windows 10 problem
@onthelearningcurve wrote: I have bought a USB Easycap video capture device to integrate with Mission Planner. However, I have tried for days to get it to work, but Windows 10 won't accept the driver...
View ArticleI need to not disable an IC kill switch upon loss of RC signal
@Autonomost wrote: Hey All,I wanted to know if this functionality exists in APM:Plane, or a decent way to do this.I have an optical kill switch on my AUX 2 port on the pixhawk for a IC engine. It is...
View ArticleWho do I give thanks to?
@Barry_Bolton wrote: For designing and creating an amazing products and software. Got everything working perfectly on my drone now. Tower connects and machine flies like a dream Posts: 1 Participants:...
View Article(SAFE) message in Mission Planner HUD
@rallyon wrote: Sorry if this is really obvious but I can't find the answer in Ardu documents or Google. What does" (SAFE)" mean on the HUD? It (seemingly) randomly pops up on the HUD but doesn't have...
View ArticleWindows 10 tablet for field use of Mission Planner
@wkf94025 wrote: I picked up a $99 USD tablet that runs Windows 10 and also Android. 8" screen, fully functional, and it runs Mission Planner just fine. Bright sun performance is okay, not...
View ArticleInverted Stabilize Yaw wrong direction
@GarrettMin wrote: Greetings, Arduplane 3.4 Definition Stabilize Roll & Yaw: In Stabilize Mode when I Roll the Yaw also Increments to improve the turn. Definition Inverted: Switch Inverted...
View ArticlePixhawk Crash complete shut down
@tschiber79 wrote: Hi, I am using this copter quiet a long time. Now it just fell down stopping all rotors mid flight. Could someone check my log file if there is something to discover and solve? I...
View ArticleRTL from follow me (guided mode) has issues
@henrik04 wrote: Using Mission Planner 1.3.38 Arducopter. Test 1: After checking GPS lock and low hdop on the laptop, takeoff in loiter. move a bit and initiate RTL: Everything ok. (set 0 altitude so...
View ArticleNeed help with sensor scaling
@bFaux75 wrote: I was wondering how you figure out the scaling for Maxbotix sensors.I've read the tutorials and they say for the one I'm using it's Vcc/512 = the scale. Now for the XL1240 it's...
View ArticleIn auto mode rover is really slow but normal in manual mode
@bFaux75 wrote: When I set my waypoints and start my mission the rover moves really slow.I have adjusted my throttle percentage and cruising speed to 100% and still barely moves but as soon as I take...
View ArticleClik here to view.
3.3.3 refused RTL after guided mode (initiated by follow me)?
@henrik04 wrote: Arducopter 3.3.3Mission Planner: 1.3.38If you look at the log (and map) from thebin file, here is a strange sequence of events:- Takeoff in loiter: Ok.- Initiate follow me {CTRL} {F}...
View ArticleGuided mode with optical flow oscillating in altitude
@sudotong wrote: Hi all, I previously posted about some problems with optical flow in loiter mode here, and was able to get them resolved thanks to the community. Thank you everyone! For reference,...
View Article