Compact camera for Pixhawk PX4
@onthelearningcurve wrote: I am looking for a compact camera that will interface via USB to my Pixhawk PX4 running v3.3.3 firmware. I am also running Mission Planner 1.3.41.What I require is a camera...
View ArticleRunning Example Sketches
@hudemirc wrote: Hello I was trying to follow the steps on the website below http://ardupilot.org/dev/docs/learning-ardupilot-the-example-sketches.html6 However i am facing with the below line on the...
View ArticleAuto Navigation Mode (ArduCopter) - Disarm after landing
@anandbaskaran wrote: We are working on a project for Drone based cargo delivery solution. We are using Ardupilot as an autopilot for the drone and I am building a web-based GCS to autonomously...
View ArticleMission Planner Computer Requirements?
@Injeffinite wrote: What are the comuter/PC requirements for Mission Planner? I can't find the documentation for it anywhere. Does it exist?Much Appreciated!! Posts: 1 Participants: 1 Read full topic
View ArticleArduBoat Troubleshooting - not quite following mission path
@jghielme wrote: It is not following a mission path very well. Sometimes, it goes in the right direction and takes a wavy path to the way-point. I changed the NAVL1_ period to smooth out the path....
View ArticleSimple answer on what I need to reverse from fresh firmware?
@AlexL wrote: Hello, I am seeing a variety of information on what inputs need to be reversed, and doing it in the software vs in the remote etc. I am starting with a fresh install of 3.2.1, and would...
View ArticleWhat does GPS Error 1.0 mean?
@MBeaubien wrote: What does GPS Error 1.0 mean? Posts: 2 Participants: 2 Read full topic
View ArticleWhat is a better plane to learn on?
@thetacowarrior wrote: Hey guys maybe you can help me out. I have multirotors and rovers, and I want to see if I like planes as well, specifically flying them FPV. Before I go all out I want to get a...
View ArticleFC, GPS, Camera position offset?
@Kyomo_Jung wrote: Hi, Specification -Skywalker X8M8NPixhawkSony Alpha 6000 With the base of GPS, FC is 15cm and 0cm offset away and Camera is 15cm, 23cm offset. I think if GPS,FC and camera are in...
View ArticleClik here to view.
The bug of Copter-3.3.3
@jane wrote: When I make the example of RangeFinder in the folder "C:\pixhawk_toolchain\ardupilot-3.3.3\libraries\AP_RangeFinder\examples\RFIND_test", there are some error like below...
View ArticleClik here to view.
Mission Planner does not have my frame type (hexa) configuration
@karkin96 wrote: As indicated in the title, and from the attached picture, none of the frame configuration fits my hexacopter be it hex 'X' or '+' configuration. Perhaps: 1. Use hexacopter 'X'...
View Article3.4-rc6 ERR codes
@OAPpilot wrote: I.ve updated to 3.4-rc6 on my 450 quad. when doing a mission, it takes off OK and switch to Position Hold, still OK, when I switch to Auto after about 1 second it goes into RTL, which...
View ArticleTower 4, tlogs whereabouts - and structure scan photos
@Pokerfjes wrote: I'm having issues with Tower 4. First - structure scanner doesn't take photos. Isn't it supposed to do that automatically? Second, and very annoying - I can't find the tlogs on the...
View ArticleCompass offset changed
@Kudykam wrote: Hi, its been a while since I calibrated compass for last time. I rebulid quad to new frame from F450 to S500, upgrade fw to latest rc6 and recalibrate compass.My previous values was...
View ArticleClik here to view.
Mission Planner Terminal Continuous Generating Garbage Characters
@AlexL wrote: Hello, I have AMP 2.6 with 3.2.1 firmware. When I open the Terminal in Mission Planner I can connect to the drone, and it gives a few messages about calibration and intialization - but...
View ArticleHow to test a ground DO_SET_SERVO?
@yoanne wrote: HelloHow to test a ground DO_SET_SERVO?thx Posts: 1 Participants: 1 Read full topic
View ArticleErr: crash_check-1
@bellibelson wrote: Hi, I had an expensive crash. I flew in POSHLD to the left with the stick at maximum. After 50 m ore so the motors stoped and the copter crashed destroying gimbal and damaging the...
View ArticleNot going back to home
@J.Leite wrote: Hi,How can adjust my software to go back to home point after finish a programmed path? Another question, if I am in the midle of a track but did not fineshed yet, can I interrupt it...
View ArticleClik here to view.
APM:Plane 3.7.1 released
@tridge wrote: APMPlane.jpg750x291 23.5 KB The ArduPilot development team is proud to announce the release of version 3.7.1 of APM:Plane. This is a minor bug fix release. A major release of 3.8.0 is...
View ArticleClik here to view.
APM:Plane 3.7.1 released and 3.8.0 almost ready for beta
@tridge wrote: APMPlane.jpg750x291 23.5 KB Development is really hotting up for fixed wing and quadplanes! I've just released 3.7.1 and I plan on releasing the first beta of the major 3.8.0 release in...
View Article